Tips for navigating difficult tenant interactions during inspections
Take this scenario: during a routine inspection, an inspector walked in the door and was immediately met with harsh words from a very frustrated tenant. The issue? A ceiling leak that had gone unresolved for almost six months. The tenant felt ignored, communication had broken down, and the inspection became the outlet for all that frustration.
So how do you navigate these situations? Here are some practical strategies inspectors (and landlords doing their own checks) can use.
Why tension arises
Most difficult interactions can be traced back to a few common causes:
- Delayed or unresolved repairs - tenants may feel like their concerns aren’t being taken seriously.
- Poor communication - if tenants aren’t kept informed, they often assume the worst. A simple update like “the contractor is booked out for two weeks” can make all the difference.
- Fear of retaliation - some tenants worry about raising issues in case it affects their tenancy or rent.
- Misunderstanding the inspector’s role - tenants sometimes see inspectors as “spies” for the landlord, rather than neutral third parties.
Strategies for inspectors
- Clarify your role early
Let tenants know you’re not there to assign blame or make decisions, only to document. A simple phrase like:
“I’m here to record what’s happening, not to decide who’s responsible.”
This sets the right tone from the start. - Acknowledge concerns without taking sides
Show tenants that their concerns are valid, but don’t get pulled into agreeing or disagreeing. Try:
“Would you like me to include that in the notes so there’s a clear record?” - Stay calm and professional
Body language and tone can defuse or escalate a situation. If a tenant is upset, don’t match their energy. Be steady and professional:
“I understand this is frustrating, and I’ll make sure it’s documented clearly.” - Don’t rush the process
Moving too quickly can make tenants feel dismissed. Take the time needed, listen, and balance empathy with staying on task. - Follow up if needed
If a tenant has raised major concerns, flag them clearly for the landlord or property manager. Using inspection software like myInspections makes this easier, as everything is already documented with notes and photos that can be shared instantly.
Things not to say
Sometimes what you don’t say is just as important. Avoid phrases like:
- “That’s not my problem.”
- “You should talk to your landlord about that.” (This can come across as dismissive, even if it’s true in some cases.)
- “I’ve seen worse.” (This minimises their concern and undermines trust.)
Even if you have seen worse, it’s better to acknowledge the concern and keep things professional.
Difficult tenant interactions aren’t always avoidable, but they don’t have to derail an inspection. Most tenants simply want to be heard and taken seriously. By staying neutral, professional, and compassionate, inspectors can act as the bridge between landlords and tenants - keeping the process fair and constructive for everyone involved.
The information contained in this article is exclusively for promotional purposes. It does not in any way constitute legal advice and should not be relied upon as the basis for any legal action or contractual dealings. The information is not and does not attempt to be, a comprehensive account of the relevant law. If you require legal advice, you should seek independent legal counsel. myInspections does not accept any liability that may arise from the use of this information.
More resources
How to Complete an Inspection in Minutes with My Inspections
Managing property inspections doesn’t need to be complicated. With the My Inspections app, you can go from start to finished report in just a few steps. In this tutorial, we’ll walk through the process of adding a property, running an inspection, capturing issues, and finalising a report.
📹 Watch the full demo video here, then follow along with the step-by-step guide.
Step 1: Add a PropertyStart by adding the property you want to inspect.
• Enter the property name or address
• Choose the insp...
Feature update: Your inspection reports get a make over
At myInspections, we know the PDF report is the bit that really matters. We were surprised to see that in April alone, 55% of inspections resulted in a PDF being generated. It’s the thing you send to landlords, tenants, or clients — so it needs to be clear, reliable, and professional.
That’s why we’ve given reports a refresh. We fixed a few of the rough edges, and while we were at it, added some of the features you’ve been asking for.
What We FixedWe heard you — some parts of the old report...
How to prepare a property for a routine inspection (Tenant & landlord tips)
Tenants sometimes scrub a property from top to bottom like royalty was about to arrive, only to find out a simple walkthrough would have been more than enough. Routine inspections aren’t meant to be judgement day — they’re about keeping the property in good shape for everyone. Here’s how both tenants and landlords can prepare without stress.
Set realistic expectationsRoutine inspections are not a white-glove cleanliness test, it’s not about catching people out. The real goals are:
• Recordi...
Should you take notes or photos first during an inspection?
Early in an inspector’s career, juggling a notepad and a camera can feel clumsy. At some point, everyone asks the same question: do you take notes first, or capture photos first? There’s no one-size-fits-all answer, but some approaches do make the job smoother than others.
Why some inspectors start with notesWriting notes first has its appeal. It slows you down, forces careful observation, and gives context before a single photo is taken. Some inspectors feel that notes add a level of profes...